Pay in installments of $6.27 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 14 - Aug 19
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
cybex aton installation Cybex Aton 2 Infant Car Seat 2016 Black BeautyCar seat includes base. INNOVATIONS IN SAFETY The new Aton 2 brings two new safety innovations to the U. S. market. Adjustable Load Leg The Load Leg, a virtual standard in Europe, is now available on the Base 2. The Load Leg provides additional support between the child restraint and the vehicle, allowing the Aton 2 to more effectively absorb and distribute crash energy. The Leg dramatically reduces forward pitching of the seat, keeping the child in
Car seat includes base.
INNOVATIONS IN SAFETY
The new Aton 2 brings two new safety innovations to the U.S. market.
Adjustable Load Leg
Linear Side Impact Protection (LSP)
The Load Leg, a virtual standard in Europe, is now available on the Base 2. The Load Leg provides additional support between the child restraint and the vehicle, allowing the Aton 2 to more effectively absorb and distribute crash energy.
The Leg dramatically reduces forward pitching of the seat, keeping the child in the prescribed position during the entire crash event. This reduces the risk of spinal cord injury due to stretching, which can be caused if the infant seat pitches too far forward.
The LSP side protectors on the Aton 2 transfer the initial impact of a side impact to the seat's shell.
The optimized structure of the shell absorbs the forces and channels them away from your baby resulting in a 40% increase in safety.
World Class Safety
- Excellent Side Impact Protection: The LSP devices in combination with the flexible, energy absorbing shell, thick EPS foam, and extra thick padded covers, absorb and distribute crash forces away from your child especially during side-impact collisions.
- Dual Weight Ranges: The Aton 2 offers dual weight ranges to help make sure your seat is reclined at the proper angle according to the weight of your child. One range accommodates children from 4–22 pounds and the other, 22–35 pounds.
- European Install: When installing the Aton without the Base, a front mounted belt guide allows the preferred ""European"" method where the shoulder belt wraps around the front of the carrier adding additional stability.
- A Steel Chassis: A solid steel spine running through the Aton 2 Base creates metal to metal contact through the Load Leg, infant carrier, and the vehicle for added strength and properly managed crash forces.
- Dual Action Release: A green safety button indicates a secure connection has been made between the carrier and the Base. This button is part of a two-step process needed to remove the Carrier from the Base, preventing accidental release.
- Certified: All CYBEX seats meet and exceed FMVSS 213 Standards and are approved by the FAA for air travel.
- Latest Safety Technologies: The seats are outfitted with the latest safety equipment including an extra wide five-point harness, padded shoulder and buckle belts, premium LATCH connectors, and anti-rebound protection.
EASY INSTALLATION
Whether you use LATCH or vehicle belts, the Aton 2 Base is truly easy to use.
- Innovative Belt Tensioner: The Aton 2 Base uses a unique Belt Tensioning Plate for a quick, simple and secure installation when using either LATCH or vehicle belts. Simply remove the slack from the belts and close the plate for a super easy and tight install.
- Recline Foot: A four-position, spring activated leveling foot makes reclining the Aton 2 easy. The dual ranges level indicator makes sure your child is reclined at the proper angle.
- Adjustable Load Leg Foot: The foot of the Load Leg adjusts from 10¾ to 18¾ inches to allow firm contact between the foot of the Load Leg and the vehicle floor.
- Premium Latch Connectors: We use only premium LATCH Connectors on our Base, making for a quick and easy installation. LATCH Connectors can be stored in the Base for out of the way storage when not in use.
- Free Latch Guides: LATCH Guides easily hook onto your vehicle's lower LATCH anchors to help make car seat installation easier while at the same time protecting your vehicle seats. Keep a pair in each car for easy transfer of car seats between vehicles.
Not compatible with hook-type Lower LATCH Connectors.
COMFORT FOR BABY AND YOU
CYBEX cars seats offer your baby a plush, comfortable environment, while making it easier on you to use them everyday.
- Ultra Light Carrier: Weighing just under 9 pounds, the CYBEX Aton 2 Infant Carrier is one of the lightest carriers on the market due to the careful consideration of materials as well as having the release mechanism as part of the Base and not the Carrier.
- Integrated Canopy: The unique integrated fold-away canopy provides SPF 50+ sun protection for your child while maintaining the sleek style of the Aton 2.
- Three Position Handle: A three position handle accomodates carrying and driving, resting, and storage when needed.
- Premium Fabrics: Super soft, extra padded covers complete with shoulder and buckle pads comfort your child while in the Aton 2.
- Infant Insert: Provides more stability to the head and upper torso and also aids in providing a better fit of the harness with smaller children.
- Newborn Inlay: Properly positions smaller babies for a better fit of the harness and also opens up the torso angle to help facilitate breathing and digestion.
- Travel System: The CYBEX Aton 2 can be paired with any CYBEX stroller for an ultra chic urban travel system.
SPECIFICATIONS
- Seat Type: Rear Facing Infant
- Child Weight: 4 to 35 lbs
- Child Height: 30 inches or less
| Infant Carrier | Carrier On Base | |
| Max Width | 17.25 | 17.25 |
| Seat Height/Top of Handle | 15.25/21 | 17/24 |
| Length | 25 | 26 |
| Load Leg Length | - | Min: 10.75 / Max: 18.75 |
| Shoulder Width | 10 | 10 |
| Harness Slot Heights | 7,9,10.5 (Without Insert: 8,10,11.5) | - |
| Weight | 9 | 21.2 |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 13 reviews
Sort
Product Reviews
★★★★★ 4
Actual espresso! Great as a backup or for vacation home or hotel room.
Color: Anti-Fingerprint Silver
I'm an experienced (20+ years) home barista. But my Italian "prosumer" machine (Andreja Premium) is in the shop for new gaskets & gauges, and I have no real backup. Nespresso is easy to use but not true espresso--looks good but not espresso flavor; adequate with Aeroccino to make fake cappuccino. Tried the "inverted Aeropress" hack. Nope--strong black coffee but still not espresso. My old camping Handpresso+Illy pod? My arms ache from pumping and barely any crema till end of brew--spewed all over the sink.
This java junkie needs her 'spro! Found myself standing in Target staring at a Breville Bambino...for $200? $50 steam toys? Been there, done that. Saw this surfing Amazon, and thought "for just one Benjamin, why not?"
Arrived overnight. Surprisingly sturdy, easy setup. Not used to tiny (51mm) portafilter (which the manual calls a "funnel" and is taller than my pro 58mm portafilters) but I also have a good wood&steel tamper I bought for my first Krups pump machine 40 yrs ago. (The plastic one with the scoop at the end in the box makes a great cat toy). Filled it, did a cleansing steam wand "purge" per the easy to follow instructions on a sticker on the side of the machine. Ground some Metropolis "Red Line Blend" espresso beans. First try "choked" the machine so I ground a bit coarser. Hit the button and...OMG! Real espresso! Flowed out in rusty brown "monkey tails!" Medium brown crema! Piping hot! Tasted it and OMFG! It's the real thing!
Noisy, but so are all true vibe-pump espresso machines. Only reason to remove a star was that the puck is wet and takes several slams against the bar of my knockbox to dislodge the grounds. The espresso it makes is nearly as good as what came out of my Andreja Premium (which demands careful dialing-in, WDT stirring, leveling and calibrated tamping). Certainly better than what Starbucks serves (much less the superautomatic machines in gas station convenience stores). Haven't tried the steam wand yet, but I bet it'll make finer pourable microfoam than the stiff stuff from my Aeroccino. Maybe not latte art quality, so what? But the espresso is good enough that you'll likely want to drink it straight.
TIPS:
1. RTFM ("Read the Friendly Manual")! Keep the nice illustrated quick-start card close by.
2. Use the 2, not the 1-cup basket. Unless you're an absolute newbie, don't rely on the automatic "1-2 cup" button; rather, use the power switch (has a little "hand" icon signifying "manual") to start and stop the extraction before "blonding" (pale crema) occurs.
3. Don't grind as finely as you would for a prosumer machine, especially not a heat exchanger with an e61 grouphead. You might find that the cheaper burr grinder you use for drip or press, on its second-or-third-click-from-finest setting, works better than a commercial grinder. (Mine's a 2-yr-pld Baratza Encore, not even advertised as for espresso). A pricy hand grinder is overkill.
4. Don't tamp as hard as you would for a prosumer machine either. In a pinch, the plastic "cat toy" in the box is fine.
5. Run a couple oz. of water, w/o the portafilter in place, after you brew your shot and knock out the puck; then wipe the group screen dry.
6. To turn the machine off, press the power/manual-brew button for at least 2 seconds till the light turns off (otherwise you'll be releasing water through the group screen).
7. Use fresh beans less than 3 wks old (preferably 7-10 days post-roast date). Grind for each shot, or at least each brew session. Keep them in an opaque canister, preferably one that lets the air out but not in (the expensive mechanical twist vacuum ones are not necessary). For the love of everything holy, NOT the fridge or freezer!
THINGS YOU MIGHT WANT TO BUY: Knockbox--doesn't have to be a pricy one. (You don't want to accidentally dump your portafilter's basket into the sink or worse, the trash can or compost pail). Spend $10 or so for a good tamper. (But let its weight do the work, and don't try to spin it). WDT needle and weighted leveler tools are overkill--as is a dosing funnel if you aren't using a Mazzer grinder with a doser (Newbies--if that sounds like gibberish, you aren't using one). The manual advises against using a blade grinder (that cheap "whirly" kind better suited to spices), and recommends a "grind type mill" (i.e., a burr grinder).
Don't get me wrong--this espresso won't be "God shots," nor "Third Wave" barista champ quality, no matter how mad your skilz. But pair it with fresh beans, filtered water and a good burr grinder (Baratza Encore or better) and with a little practice you will be rewarded with the real thing! For $99--just a little more than those "steam toys" that brew into glass carafes--if it lasts me a year, I'll be delighted. I won't be giving it heavy use once my prosumer machine comes home, but it will more than just "do."
EDIT 3/23/26: Decided to try steaming milk, to see if it’s controllable for microfoam. (My Andreja Premium is too powerful—heats the milk too fast after stretching (and even 2 seconds is too long to stretch before getting thick foam). Well, it will take a little patience to wait and then bleed off some water. But it is quite gentle and controllable. Do I want to use two machines (at opposite ends of the room) to make a drink with latte art? After all its shots are not as good as from my prosumer machine, which steams too powerfully. But it DOES what it’s supposed to.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 23, 2026
★★★★★ 5
Good coffee machine
Color: A-Brushed Silver, Color: A-Brushed Silver
☕️ Very stylish and compact coffee machine!
The coffee comes out aromatic and tasty, and the milk foam is delicate and airy, like in a coffee shop. The machine is easy to use, heats up quickly and does not take up much space in the kitchen. I really like the modern design and high-quality materials. Perfect for homemade lattes and cappuccinos 🤍
✨ I use it every day and am very satisfied!
The coffee machine looks expensive and minimalistic, fits perfectly into the kitchen. The coffee is rich, and the cappuccino is just perfect. Easy to care for and convenient to use. For lovers of homemade coffee - a great purchase ☕️
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026
★★★★★ 5
Great Coffee, Tiny Footprint!
Color: A-Brushed Silver
I love this compact espresso maker! The 20-bar pressure pulls a rich shot with excellent crema every time. The milk frother is powerful and creates perfect foam for lattes and cappuccinos. It heats up very fast, looks sleek in stainless steel, and doesn't take up much counter space. The 44oz tank holds plenty of water for multiple drinks. Highly recommend for the price
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 5
Great espresso maker
Color: A-Brushed Silver, Color: A-Brushed Silver
I’ve been using this espresso machine for a little while now, and honestly it’s become part of my daily routine. It heats up quickly, the espresso comes out rich and smooth, and it’s nice being able to make coffee at home instead of spending money at cafés all the time. I also love how easy the steam wand is to use when I want to make lattes. Overall, it feels really sturdy and looks great in my kitchen too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
★★★★★ 5
Great Coffee, saving Starbucks money everyday
Bought two of these 14 months ago:
1) Makes a great cup, hot, very tasty; I work in the coffee industry, this is a great mini version of a proper espresso machine
2) It's miniature, especially great for small kitchens. Stainless steel, very easy to use and clean
3) The milk steamer is average, almost a gimmick
If what you care is the classic black coffee with milk this is a great option, definitely good value
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 22, 2026
recommand products
Bubble Plant Pot
22.33
Nearly Natural Geranium Artificial Plant in Metal Planter UV Resistant - Indoor/Outdoor
24.04
Extra Large White Mist Sphere Tree Planter 686 L
26.71
Hanging Jute Plant Pots – Yester Home
20.23
Ashman 12" Plant Hanger Basket with Sword Design Hanging Flower Planter Basket Ideal for Fences, Sword 2 Pack
29.09