Pay in installments of $6.28 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 14 - Aug 19
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
cpst uppababy aria UPPAbaby CRUZ V3 + ARIA V2 Travel SystemThe Full Featured Combo. The Full Featured Combo For the ultimate in versatility and safety, the Aria V2 directly attaches to the Cruz V3 for a complete travel system. This combo includes the Cruz V3 Stroller along with the Aria Infant Car Seat and base. Connect From Day One From the very first stroll, conveniently pair the Cruz V3 and Aria V2 to create a premier system that wont compromise on function. Simple Release Button A convenient release
The Full-Featured Combo.
The Full-Featured Combo For the ultimate in versatility and safety, the Aria V2 directly attaches to the Cruz V3 for a complete travel system. This combo includes the Cruz V3 Stroller along with the Aria Infant Car Seat and base.
Connect From Day One
From the very first stroll, conveniently pair the Cruz V3 and Aria V2 to create a premier system that won’t compromise on function.
Simple Release Button
A convenient release button under the Aria V2 carrier removes it from the Cruz V3 frame in one seamless motion.
Easy Attach & Reverse
The Aria V2 Car Seat attaches directly to the Cruz V3 Stroller to create a stylish and simple solution that goes from drive to stroll. Plus, the carrier can reverse to an outward-facing position for added ease.
CRUZ V3 Stroller
The Cruz V3 combines a sleek, streamlined design with versatile functionality, offering effortless maneuverability from newborns to toddlers. The perfect solution for families seeking a single, full-size stroller that’s smooth and easy to use, without weighing you down.
Aria V2 Infant Car Seat
The Aria V2 redefines lightweight infant car seat standards weighing in at just 6 lbs. Engineered for parents on the go, it combines a sturdy yet light build with extra legroom for added comfort. With innovative features like SmartSecure® technology, an extra-large canopy, and an included All-Weather FootCover, it offers a safe, spacious, and convenient ride for both baby and parents.
CRUZ V3 Features
- Suitable from birth with Bassinet or Infant SnugSeat accessories
- Full-size reversible Toddler Seat
- Five-point, no-rethread harness
- Extendable canopy with UPF 50+ protection, zip out fabric and mesh panels
- Vented peekaboo window
- One-handed, multi-position recline
- Adjustable handlebar
- Extra-large, easy-access basket with 30 lbs weight limit
- All-wheel suspension
- Front wheel locks with visual indicators
- Mesa Infant Car Seat attaches directly to stroller without adapters
- 100% full-grain leather accents
- One-step fold, stands when folded
ARIA V2 Features
- Lightweight design at just under 6 lbs, the lightest on the market
- Included All-Weather FootCover ensures baby is secure, cozy, and covered in all seasons
- Two-Piece Robust Infant Insert ensures proper fit and body positioning for preemies from approximately 4 lbs. with ability to fit babies up to 4 months
- Adjustable headrest with 25 preset positions for a more precise fit
- Ergonomic aluminum carry-handle for comfort and portability
- Extra-large, UPF 50+ canopy with pop-out sunshade and ventilation for airflow
- Back panel ventilation for additional airflow keeping baby cool and comfortable
- Advanced Side Impact Protection with energy-absorbing EPP foam
- Simple one-crotch buckle position simplifies the buckling process
- Effortless no-rethread 5-point harness adjusts as your baby grows
- European Belt Routing for a more secure installation when installing without the base
- Removable, machine-washable seat and canopy fabrics for easy cleaning
- All fashions are Fire Retardant Free through our DualTech™ fabrics
- Effortless compatibility and portability with direct attachment for Vista® and Cruz® strollers
- Convenient adapters available for the Minu® and Ridge® strollers
- GREENGUARD® Gold certified with flame-retardant-free DualTech fabrics
- Designed and tested to comply with FMVSS 213a and 213b standards
- FAA certified for aircraft use
- Product Lifetime Warranty
ARIA V2 Base
- Included base with adjustable load leg for stability and energy absorption
- Enhanced safety with Anti-Rebound+ Panel for increased stability
- Narrow 17” wide footprint to maximize space in your backseat
- SMARTSecure® System with red-to-green visual indicator installs in seconds
- Easy-to-release base for quick attachment and detachment
- Adjustable base foot with four positions to accommodate different seat angles
- Auto-Retracting LATCH for effortless installation
- Built-in lock-off for secure seatbelt installation
- Dual bubble level indicators ensure correct base alignment
- Streamlined, low-profile base with finished bottom
CRUZ V3 Specifications
- Suitable from 3 months to 50 lbs
- True Weight (includes canopy, wheels, and basket): Frame + Seat: 25.5 lbs Frame: 19 lbs Seat: 6.5 lbs
- Unfolded: 37.5″ L x 22.8″ W x 40″ H
- Folded with seat attached: 16.5″ L x 22.8″ W x 33″ H
- Folded without seat attached: 12″ L x 22.8″ W x 30″ H
ARIA V2 Specifications
- Approximately 0–1 years
- Suitable from birth (4 lbs - 30 lbs and up to 30” in height), whichever comes first (US only)
- Carrier Weight: 5.9 lbs (without canopy and insert)
- Base Weight: 12.6 lbs
- Carrier Dimensions 24.5” L x 17” W x 18.5” H
- Base Dimensions 23.9” L x 14” W x 15.2” H
What's included: Frame + Basket, Wheels, Toddler Seat + Canopy, Toddler Seat Rain Shield, Toddler Seat Bug Shield, ARIA V2, ARIA V2 Base, Infant Insert.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.9 ★★★★★
Based on 10 reviews
Sort
Product Reviews
★★★★★ 5
Little work horse!
I LOVE the look of an edged sidewalk. After a few calls to some local landscape companies, I couldn't find anyone with an edger. Crazy! So I bought myself this one! Super easy to put together and just as easy to use. My walk hasn't been edged for many years and was very overgrown. I was nervous that I wouldn't be able to run this thing, but this little work horse did the job for me and did it perfectly. It will be super easy to keep it edged now. Extremely happy with this purchase.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2026
★★★★★ 4
Takes The Edge Off!
This is a decent product. If you are going to do a lot of edging, or want to do deep trenching to run conduit, etc. this is NOT the product you want. It is electric, so you are tethered to an outlet, and of course, the farther you go on extension cords, the less of the 12 amp juice you get. It also trenches to 1 1/2", which is OK, but not enough to dump conduit, etc.
That said, this is a very good edger. Out of the box, it is minimal assembly. You connect the three pieces of the shaft, removing some edge tape from it, and inserting two metal bolts and plastic knobs, similar to most lawn mowers these days. Then you install the plastic handle with another bolt. That's it.
For use, you have a lever which you pull up for edging and lower for trenching to adjust the group clearance. You also choose 1", 1/4", or 1 1/2" depth. Then you plug it in.
There is a white line on top of the blade cover so you know where the blade is. You just pull the trigger to run the blade, or release the trigger to stop the blade.
Be careful not to lose sight of your electric cord so you don't hit it!
I edged along my driveway, about 50' on each side, as well as my front of my lawn, so another 85' along the lawn and the apron (both sides). That's over 350'. It cut through the grass and dirt easily. It struggled a couple of times, on some tough mounds of grass, but like any other tool, you don't force it when that happens, just back up and do that area again slowly.
If you come too close to blacktop, Belgian block, stone, etc. you will see sparks so you will know.
Just keep in mind, this is an edger. You will be left with the severed grass/sod to remove. In my case I was loooong overdue for a edging, so I spent a long time scraping the sod off the pavement with a shovel. I expect with more frequent ending, and now working with a cleaner edge, this will be less of an issue. Either way, that is not on the product, but the state of the lawn.
The edger has 2 read wheels and one smaller front wheel so , although this is not like a big, gas-powered curb jumping unit, you have the option of attacking a curb edge from either the blade side or other side of the edger, so you can get real close to a Belgian block curb.
I also did the edge where my grass meets my mulched flower bed, but that was more of a trimming than a edge removal.
Overall, the Work edger did as good, or better, a job than my string trimmer, and I didn't have to stop every few minutes to rewrap string. Plus it trenched enough to give me a definitive edge, whereas the string edger just cuts into the grass, not a real trench.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 28, 2020
★★★★★ 5
Does the job!
Puts in the work! Knocked out my driveway no problem. Unsure about longevity but it’s great for a homeowner. Easy to assemble. Easy to use. Adjustment is nice along with the guide plate.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 5, 2026
★★★★★ 5
Easy to use for a clean looking cut!
I do wish there was a cordless version but I'm so glad I bought this. It took some time to edge everything the first time because I had to cut the lines but it's been a breeze ever since. I just walk the perimeter of the yard and driveway and it does it's job with ease.
The front wheel has three settings which determines how far down the blade cuts and the blade has two settings for edging or trenching. The handle is stationary but it can be lifted up or down. There's a guideline on top of the blade guard that helps identify where the blade is going to make the cut. TIP: Lean it back on the back wheels before pulling the trigger and slowly bring it down because it will jump if the blade isn't lined up and touches the concrete.
It doesn't roll well in the grass but it's very smooth when rolled on the concrete. It's definitely worth having to give a clean and finished look. It's well built and isn't too heavy but definitely has some weight to it. It's only loud when the blade hits the concrete otherwise it sounds like a drone. The only complaint I have is that I have to watch the cord closely other than that it's the perfect tool to give a clean look to the yard.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 5, 2025
★★★★★ 5
Great tool, well worth the money!
I'm thrilled and pleased with the Worx edger. I bought it because it's electric, cheaper than other styles and I don't have to fool with a 2 stroke engine. I bought Worx, because it has a good guide to help me keep the blade away from the sidewalk, as well as a white mark on the housing to give a general idea of where the blade was. Also I thought it seemed to have a good engine. Now I'm sure it has a good engine. I looked at 3 other comparable trimmers, and because of the guide and engine, chose Worx. I read the 1 star reviews, many of the 5 star reviews and in between, as well as all the specifications I could. One of the competitors was attractive to me, but the 1 stars indicated there was a small tendency for the engine to quit. There were many less reviews for most of the models and many for that one, but I chose this one for the same amperage of engine, but less HP, which might, in my mind, over-work the engine which would account for it being ruined. One had a better warranty, but Amazon offered 2 more years for about $750, so I upgraded the warranty to 4 years,I have Tall Fescue grass in sandy loam soil in SE Wyo because of drought resistance, and it's a Northern grass). The grass is taller and tough as well as more in clumps. The ground probably is much easier to work than clay. The edger handled the tall grass ok, with all the clippings which had accumulated. I It was a long hard job to do the first trimming, and I was impressed with the 'Worx. I tried not to work it harder than necessary but it took more than 5 or 6 hours of work. I used the blade down almost to the long hole marker and had parts of 2 teeth left. It worked well; didn't clog; had power. Didn't ruin the engine. Didn't work me hard! I had to tighten the blade after about 10 feet, but only that once. In one area I had to run it on the wrong side, with the wheels on the grass. It worked ok, but worked much better where it was possible to put the wheels on the cement, and thus use the guide! It would be nice to be able to move the handle and the guide to the other side instead of the way I did it. The cord holder worked poorly for a 3 wire 12 gauge extension cord, but worked fine when I got out the smaller 14 g. The metal trimmer guide that helps hold the blade away from the side walk pulls up for use of the edger as a trencher. My lawn looks terrific. The blades were MUCH more expensive than the B & D; so before I bought Worx, I searched the internet and found an electric company which had a 3 pack of original equipment blades for it for $28, and on sale for $22. I scored on the tool, and on the blades! PTL!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 13, 2015
recommand products
Amagabeli Hanging Plants Brackets 12" Wall Planter Hooks Hangers for P
24.10
Juno Macrame Plant Hangers (set of 4)
24.93
Ashman Metal Hanging Planter Basket with Coco Coir Liner Round Wire Plant Holder Chain Flower Pots Hanger for Indoor and Outdoor Garden Decoration
20.92
Wire Grow Basket With Coco Liner & 4 Wire Hanger
24.47
Modern Plant Hanger – Etch and Ember
29.96