plant pot large Cloche Extra Large Planter
SKU: 32508229534
plant pot large

plant pot large Cloche Extra Large Planter

Sale price$25.45 Regular price$28.28
Save 10%

Pay in installments of $7.07 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 3 - Jul 8

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

plant pot large Cloche Extra Large PlanterSpecifications Available in 3 colors, each sold separately Product Dimensions: 21. 5"W x 20"H Base: 16"W Weight: 44 lbs. Inside Dimensions: Top: 20. 25"W Bottom: 15"W Height: 19. 5" Available in Brown, Grey and Charcoal finishes Makes a beautiful focal point for your garden setting, either filled with beautiful blooms or greens or left empty as a wonderful accent piece Manufactured with a high density yet lightweight concrete cast stone mix Finish

Specifications
  • Available in 3 colors, each sold separately
  • Product Dimensions: 21.5"W x 20"H / Base: 16"W / Weight: 44 lbs.
  • Inside Dimensions: Top: 20.25"W / Bottom: 15"W / Height: 19.5"
  • Available in Brown, Grey and Charcoal finishes
  • Makes a beautiful focal point for your garden setting, either filled with beautiful blooms or greens or left empty as a wonderful accent piece
  • Manufactured with a high density yet lightweight concrete cast stone mix
  • Finish/Stain is hand applied by trained artisans
  • Features unique designer detail and superior craftsmanship
  • Weathers naturally outdoors
  • One drainage hole, centered, approximately 1/2"
  • Made in the USA

Due to the nature of concrete, there is very little that can go wrong with it as long as it's properly cared for. For this reason, Campania does not offer a warranty for their products. Our 15+ years of experience has shown that Campania's products are more than capable of withstanding the test of time. These products are designed to last well over 40 years, and will as long as proper care is provided for them.

In the winter, if a planter is to remain planted, it should be raised up off the ground making sure not to block the drainage hole. This allows the planter to drain and will prevent the planter from freezing to the ground. If the planter is not to be planted, it should be brought inside a garage or shed. If this is not possible, follow the steps above, but turn the planter upside down to prevent it from filling with snow and ice. It should then be covered or wrapped with burlap or any absorbent material (old blanket/towel) and then wrapped with dark plastic to prevent it from accumulating moisture.

    Description

    Lightweight Concrete

    Campania proudly manufactures its cast stone products in the USA using locally sourced materials. All of our cast stone pieces are manufactured using the wet casting technique with a proprietary high density cast stone mix, yielding a PSI strength of approximately 7,500. Our cast stone products may qualify for LEED credits as applicable to your project. Cast stone produces a strong and durable product that will weather naturally in an outdoor environment. Simply stated, cast stone is chosen for its beauty and authenticity. Our material is natural, authentic, made in the USA, and 100% recyclable. These planters are often specified for hospitality projects, large scale public space installations, pedestrian and traffic safety, and other custom projects. Although we recommend that you take advantage of the quick turnaround of our stocked product; these shapes, finishes, and/or sizes are not always right for every job. Campania has the capability to produce custom molds and colors in our Pennsburg, PA factory.

    Campania is pleased to introduce a new collection of lightweight poured glass fiber reinforced concrete manufactured at our facility in Pennsburg, Pennsylvania. Unlike our cast stone, glass fibers replace stone aggregate to create a strong and durable product with a thinner profile and lighter weight.

    Shipping Notes
    • Free Standard Shipping on $100+ Orders to the USA.
    • Except Preorder products are shipped in 48 hours.
    • Delivery to the USA:
    1. Standard Shipping : 3-10 business days
    • If time is of the essence, please consider selecting expedited delivery for faster service.
    Exchange/Return Notes
    • We offer a 30-day return/exchange service after receiving.
    • Final sale items are not eligible for returns or exchanges.
    • To process your return/exchange, please contact us at [email protected]
    • Please click here for more details>>> Return & Exchange Policy
    SKU: 32508229534

    Discover Niche Categories That Outsell plant pot large

    Top-Converting Item to Boost Your Average Order

    4.3 ★★★★★
    Based on 1277 reviews
    Sort
    Highest Rating
    Newest First
    Oldest First
    Product Reviews
    R
    Verified Purchase
    ralversity
    Lexington, US
    ★★★★★ 3
    Does the job, but assembling by yourself is a nightmare
    Size: 4 Panel-88'', Color: Black
    Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on May 29, 2026
    T
    Verified Purchase
    Talagand
    Los Angeles, US
    ★★★★★ 4
    Reasonably adequate room divider
    Size: 4 Panel-88'', Color: Beige
    I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on October 31, 2023
    B
    Verified Purchase
    Barbara McCloud
    Louisville, US
    ★★★★★ 5
    Nice and strong
    Color: Black, Size: Wheel-6 Panel
    Nice and strong, tedious, putting together, but very good quality
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on March 17, 2026
    A
    Verified Purchase
    Al Tompkins
    Massapequa, US
    ★★★★★ 5
    if you are going to be moving them a lot, buy something more sturdy.
    Color: Black, Size: Wheel-6 Panel
    I use these at our churchc. They are pretty good, not terribly study and the screw that hold the faabric have pulled out in a couple of places. But they wqould work especially well if you were not constantly moving them as we do. They are a bit of a pain to assemble.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on January 20, 2026
    J
    Verified Purchase
    Julie Lincoln
    West Palm Beach, US
    ★★★★★ 4
    Easy to put together , decent quality
    Color: Black, Size: Wheel-6 Panel
    Purchased for office, easy to put together , durable quality , exactly what we needed to partition a small space
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on November 15, 2025

    recommand products