tone job pedal EarthQuaker Devices Tone Job

tone job pedal EarthQuaker Devices Tone JobEarthQuaker Devices Tone Job EQ & Boost This compact Boost & EQ device is based around the tone shaping options available in old audiophile grade stereo preamps, making it a great addition to your pedalboard, no matter what instrument you play. So what does that mean, exactly? It means that youll hear full frequency response from your Tone Job everywhere you plug it in guitar, bass, drum machine, synthesizers, steel drums, harpsichord, kazoo, car

EarthQuaker Devices Tone Job EQ & Boost

This compact Boost & EQ device is based around the tone-shaping options available in old audiophile-grade stereo preamps, making it a great addition to your pedalboard, no matter what instrument you play.

So what does that mean, exactly? It means that you’ll hear full frequency response from your Tone Job everywhere you plug it in – guitar, bass, drum machine, synthesizers, steel drums, harpsichord, kazoo, car stereo, or wherever!

The Tone Job has active EQ controls for Bass, Mid and Treble, with up to 20 dB of cut or boost, which is handy for pairing up with other pedals in your chain to breathe new life into old dirt. Unlike boring old graphic EQs, the Tone Job’s EQ controls are interactive, so you can experiment with different settings to alter the response and overall feel of the device, getting your tone out of the lunchroom and back on the clock.

Place the Tone Job at the beginning of your chain to alter the overall character of your guitar, or use it at the end to boost output at the end of a long cable run and fine-tune your tone. The Level control on the Tone Job can boost your signal up to 5x the original input level, so you’ll always be heard, and makes for a fantastic solo and/or clean boost!

Controls:

Level: Post EQ volume control. Can boost the signal up to 5x the input. Unity is around 10 o’clock.

Treble: The center position is flat and marked with a center detent in the potentiometer. All settings above this point boost the treble and all settings below cut treble.

Bass: The center position is flat and marked with a center detent in the potentiometer. All settings above this point boost the bass and all settings below cut bass.

Middle: The center position is flat and marked with a center detent in the potentiometer. All settings above this point boost the middle and all settings below cut middle.

Specifications:

• Dimensions: 4.75 x 2.50 x 2.25 Inches (121 x 64 x 57 mm) With Knobs
• Current Draw: 21 mA
• Input Impedance: 1 MΩ
• Output Impedance: < 1 kΩ
• Switching: True Bypass, Electronic Relay-Based Switching (Audio Will Not Pass Without Power)
• Power: 9 - 18 Volts DC (Standard 2.1 mm Negative Center Barrel); Do Not Run At Higher Voltages; Isolated Power Supply Recommended To Avoid Noise

The pedal comes with EarthQuaker Devices' Factory Warranty and our 100% satisfaction guarantee!