Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 6 - Jul 11
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
mietspiegel tarp Ultralight Tapered Tarp 8'/6'The Tarp Not too big, not too small. This tarp tapers in width from about 8' at the head to 6' at the foot and is offered in two lengths to better fit your needs. We think this size tarp is the sweet spot for the solo camper. Tapered shape uses space efficiently Curved ridge and edges provide a taut pitch Recycled fabric option Silpoly won't sag when the temperature drops Lower water retention than silnylon Reflective tie outs Great for partnering
The Tarp
Not too big, not too small. This tarp tapers in width from about 8' at the head to 6' at the foot and is offered in two lengths to better fit your needs. We think this size tarp is the sweet spot for the solo camper.
- Tapered shape uses space efficiently
- Curved ridge and edges provide a taut pitch
- Recycled fabric option
- Silpoly won't sag when the temperature drops
- Lower water retention than silnylon
- Reflective tie-outs
- Great for partnering with your Bug Bivy or our 1P Bug Shelter.
Tie-outs
Perimeter tie-outs are located at each end of the ridge (2), the corners (4), and the midpoints of each side (2). There are hang loops located at each end of the ridge (2), the middle of the ridge (1), and about 14" in on the ridge from each end (2) (18" on the 10' tarp).
There is an additional tie-out on the ridge about 14" in from the narrow end (18" on the 10' tarp) to allow the option to pitch with an improvised rear beak. To make the beak, move the guyline from the rear apex to the shock cord loop on the ridge tie-out. We recommend using a fastline clip (included in the optional rigging kit). Stake out the rear corners so the rear edge is pulled taut between the corners.
Note that the color of the UltraGrid reinforcements may vary from what's shown.
Seam Sealing
You'll need to seam seal the ridgeline of this tarp prior to use as per these instructions (or use our service).
Compatible with:
- Bug Bivy: Y-zip, Chest zip, Ridge zip
- Wind Bivy
- Simple Tub
- Tub-floor
- Bug Canopy
- 1P Bug Shelter
Made in the USA from imported materials.
Specifications
Fabric Options
Eco Silpoly:
- Fabric: 20D SilPoly - RECYCLED
- Coating: Sil/PU Blend
- Hydrostatic Head: ~2000mm
- Learn more about material considerations on our Materials Page.
Membrane Silpoly:
- Fabric: 15D SilPoly
- Coating: Sil/PU Blend
- Hydrostatic Head: ~2000mm
Weight
Eco Silpoly:
- Tarp (9' length): 10.1 oz | 287g
- Tarp (10' length): TBD
- Stuff sack: 0.3 oz | 8g
- Landfill waste: 4.4 oz (waste from in-house manufacturing)
Membrane Silpoly:
- Tarp (9' length): 7.9 oz | 223g
- Tarp (10' length): TBD
- Stuff sack: 0.2 oz | 6g
- Landfill waste: TBD
Dimensions
9' Length Option:
- Front width: 8'-0" | 2.44m
- Rear width: 6'-0" | 1.83m
- Length: 9'-0" | 2.74m
- Packed size* (Eco): 8" x 5" x 2" | 20cm x 13cm x 5cm
- Packed size* (Membrane): 7" x 5" x 1.5" | 18cm x 13cm x 4cm
- Packed size is measured with tarp folded in the provided stuff sack. It can squish down to roughly half the stated size.
10 ft length Option:
- Front width: 8'-2" | 2.49m
- Rear width: 6'-2" | 1.88m
- Length: 10' | 3.05m
- Packed size (Eco): 8" x 5" x 2" | 20cm x 13cm x 5cm
- Packed size* (Membrane): 7" x 5" x 1.5" | 18cm x 13cm x 4cm
- Packed size is measured with tarp folded in the provided stuff sack. It can squish down to roughly half the stated size.
Required items:
- These items are not included
- Trekking poles (or other support for front and rear)
- Rigging
- Stakes: 6 Minimum
- Silicone Seam Sealer
Optional Rigging Kit:
- 30 ft x 1.8mm UHMWPE core cord (0.79 oz | 22.5g)
- 7 x 10mm Tensionlock Tensioners (0.26 oz | 7.5g)
- 1 x 10mm Fastline Clip (0.12 oz | 3.5g)
- 2 x Guyline Grommets (0.19 oz | 5.5g)
Rigging
An optional rigging kit is available for those who wish to set up their tarp per our recommendations.
The kit comes with the following items:
- 30 ft of 1.8mm UHMWPE core guyline with reflective tracer
- 7 x 10mm Tensionlock guyline tensioners
- 1 x Fastline clip
- 2 x Guyline Grommets
Installation:
- Cut your guylines to the lengths shown below.
- Front corners: 40" x 2
- Rear corners: 30" x 2
- Front apex: 96" x 1
- Rear apex: 80" x 1
- Midpoints: 20" x 2
- Install the tensioners using a girth hitch (see images below). Install at all perimeter tie-outs except the rear apex
- Clip the fastline clip to the rear apex.
- Install guylines into the tensioners:
- Tie a loop in one end of each guyline. We prefer to use a bowline knot.
- Thread the guylines through the tensioners as shown in the photos below. For the two guylines that attach to the ridgeline, slip a grommet onto the guyline prior to threading it through the tensioner.
- Tie a knot in the untied end of each guyline. We use a simple overhand knot.
Girth Hitch:
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 1115 reviews
Sort
Product Reviews
★★★★★ 5
Rock Solid and Computer / Wall Safe! Last PC Mount you'll ever need.
This is the hardware that you want in your office: robust, no-nonsense, and able to boss you around its workload. I installed a full size PC case/server in it, and it is rock solid once you lock it in. The open-frame design also merits a mention here as it greatly improves airflow and allows you to access ports on the motherboards and other hardware on your rig should you want to during your gaming sessions without bringing too much heat inside and causing headaches. The width of the holder can be adjusted (approximately 7.7” through 11.8”) in width and (approximately 20” through 25.8”) in height so it fits a large variety of towers, so you don't have to worry whether it could fit your set-up or not. Smaller towers may have substantially more wiggle room though.
The mount's weight limit is no joke—up to 44 lbs—so you're not sacrificing stability just to save a few bucks. The shells are quite secure, although some people may have wished for a little more tightening bite; they still prevent your equipment from falling off if you accidentally bump on a wall, which is more important than you may think.
A little nitpick: the lower wall-mount bracket could have a couple of extra pilot holes to reduce twisting over time. Not a breaker, just a heads-up for all of you who are looking to the long term. Altogether, it's a reliable, solid fix that is well worth the cost, particularly if you're cramming space and airflow in a tight configuration.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 27, 2025
★★★★★ 4
Best for a large PC case, works on smaller towers with mods
This thing is solid! I strongly recommend setting your tower on it to get a feel for the orientation you want before attaching it to your desk or wall. I had to re-mount mine because I had it positioned too far back to be able to plug cables into the PC tower. When the ad says its for a large PC tower they are not joking. I would consider my PC case to be a fairly average size but the bottom clamp and side arms don't hold my case at all. Theres a z shaped bracket included to attach to the main support and let it contact the desk or wall surface behind it. I used this part to wedge between the bottom clamp snd my PC case to hold it in place. My mount is still very sturdy without that bracket in place. I cheated during install and stacked some books under it to bring it up to the height of the bottom of my desk, made easy work of it. I really want to give it 5 stars but unfortunately the fitment issue leaves me hanging, literally. Maybe I will update my rig and get a larger PC case down the road. What I love about this item is my tower used to be on my desktop. Now its tucked away neatly and I was able to separate my 2 monitors more. Feels like a whole new workspace with less clutter and more table space for projects. Good item.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 4, 2025
★★★★★ 5
Attractive design+color, slender profile, excellent functionality, budget price (8 outlet model)
Color: Black, Size: 8 Outlet, Style: Outlets Only, Color: Black, Size: 8 Outlet, Style: Outlets Only
This is exactly what I wanted. (It’s even better - slimmer, easier to handle cord, than the Belkin in this design style.) Perfect fit for the lower shelf of my night table. To charge my phone, iPad, Bluetooth headset, and the like (plug my lamp into it as well, for convenience-sake not surge protection). The 8 outlets are perfectly spaced/placed.
I briefly considered the model with the USB cord plugs directly into the unit, but for me, at this point, for this purpose the extra price didn’t seem worth-it. My USB charging adapters aren’t that bulky, and with this design they can be plugged side-by-side.
I do like the convenience of that design, with the USB plugs, and will likely get it in the future, and move this one to either my home-office, or dressing area. So, this “basic” one wouldn’t be wasted. And meanwhile it’s a great budget option that sacrifices none of the design, style, or function. It’s attractive, useful, well conceived/designed and executed. For well under $20. Nice color too.
Would be perfect anyplace. Though I’d think this more basic model isn’t intended for multiple multimedia devises all in one - looked like they had more suitable models for if you wanted to say plug in your TV, your game console, your streaming and/or cable - do they still call it that? - box/devise, your speakers with or without subwoofer, along with your modem and WiFi-router all into one. Someone, who works with high end electronics and/or an electrician/engineer correct me if I’m wrong. But I’d get a model - of this same device if there’s one of suitable capacity - which that’s meant to handle such a load for my entertainment center. I think another reviewer talked about joules and capacity, I think it was for this model. Or at least this manufacturer.
Though I don’t see it being convenient for travel - not sure about that question there, maybe more convenient than some other styles; certainly not anywhere that’s not 120V, and I doubt that at this level it’s sufficient protection for anywhere with radically irregular electrical/voltage supply, not just the occasional spike, like say - Malawi Africa for a random example out of personal experience, for something like that you’d actually have to spend money and get a proper UPC, not to mention bulky-bulky, but that’s not relevant here, for this, just this isn’t something like that. This is for use with stable electrical and voltage supply, should give perfectly adequate protection for the occasional spikes and surges such as those following a power outage, within the design specification.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2019
★★★★★ 5
Excellent value from a reliable & known brand
Color: Black, Size: 8 Outlet, Style: Outlets Only
I've always bought surge suppressors and the like from APC. They're very reliable and well-made. The equipment protection guarantees are great, too. This strip is not as sturdy as some other APC strips, but it is also less expensive. Perfect for basic home use (a TV, Xbox, etc). I'd get a higher up APC model if you're protecting a workstation computer or high end audio gear. But for basic stuff, this strip is a good value. I'd trust this far more than a lesser known brand.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 17, 2021
★★★★★ 5
Works well in home office.
Color: Black, Size: 8 Outlet, Style: Outlets Only
Nice layout of outlets. Sturdy construction. Flat electrical plug. Works well in home office.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 24, 2025
recommand products
Scott 20 Zoll Kinder-MTB Contrail 200 FC Bayern München – fahrrad-Ass.de
29.09
Haibike Trekking 6.5 schwarz | 600WH | E-Bike Damen Trekking
20.01
ÖHLINS • FEDERGABEL-SERVICE • SWIFT SUSPENSION
22.28
FOX und Marzocchi Gabelservice – MTB Classic Parts
25.25
Mountainbike-Guide Tasse Geschenk Spruch Wer Will Schon Prinzessin Sei — TrendationStore
26.16