fahrradlenker höher stellen cube BTA Cube Aerium C68 TT – TRI-C

fahrradlenker höher stellen cube BTA Cube Aerium C68 TT – TRI-CSuitable BTA for the Cube Aerium C68. The plate is screwed under the armrests. Contains: TRI C Flex Riser TRI C Carbon Plate + Spacer for the bottle on riser + Spacer Reach for speedometer on riser + Mount for Garmin Wahoo + Metal slide to move riser Optional: Whoppa for 2 bottles at the same time. There is a Pro and a Standard plate. The measurement instructions for which plate is the right one are in the product photos: Pro: hole spacing Extension

Suitable BTA for the Cube Aerium C68.

The plate is screwed under the armrests.

Contains:
TRI-C Flex Riser
TRI-C Carbon Plate
+ Spacer for the bottle on riser
+ Spacer/Reach for speedometer on riser
+ Mount for Garmin / Wahoo
+ Metal slide to move riser
Optional: Whoppa for 2 bottles at the same time.

There is a Pro and a Standard plate. The measurement instructions for which plate is the right one are in the product photos: Pro: hole spacing Extension 135mm, Standard 160mm or 170mm.

Gorilla bottle holders shown NOT included.

The riser is 60mm high at 0 degree angle.
Depending on the angle, the minimum and maximum height changes, so a 20 degree riser is lower at the front and higher at the rear.

If the cockpit is tilted at 15 degrees, a riser angle of 15 degrees will compensate for this, ensuring the bottle and speedometer are horizontal. We tend to recommend choosing exactly this angle (cockpit angle = riser angle).

Additionally, there is the option to order our Whoppa directly, so that you can ride 2 bottles on the riser at the same time.
This BTA combination is also available as a single product or the Whoppa individually for reordering or similar.

This Riser Flex Set is used to carry a speedometer and bottle between your arms as needed. A bottle can be mounted and a bike computer in front of the bottle. The metal slide allows the riser to be mounted further back or forward to ensure an ergonomic position or, depending on the bike, to comply with the rules. The height of the bottle cage can also be varied, allowing you to mount a low riser as a base, which ensures safety and aerodynamics according to DTU and Ironman rules. If your arms grow due to intensive training or clothing, or if the riser is a little too low, the spacers under the bottle can create more space. The computer spacer can also be used to raise the speedometer and attach it further forward, so that even very large speedometers fit securely on the riser in front of the bottle cage.

If the cockpit is tilted at 15 degrees, a riser angle of 15 degrees will compensate for this, ensuring the bottle and speedometer are horizontal. We tend to recommend choosing exactly this angle (cockpit angle = riser angle).

Delivery time: approx. 3 to 7 working days (international delivery time additional 1 to 6 days)