- Offset pole structure - Balances headroom where you need it most
- Side entry - Easy, unobstructed access
- Double-wall design - Modularity and condensation management
- Side vestibule - Keeps your gear accessible without blocking entry
- Vented apexes - Enhanced airflow to reduce condensation
- Recycled silpoly fabric - Stays taut when wet
- Two inner material options - A more durable, standard option, or a lighter weight option
- Three length options - Dial in the length to your height and needs
Pay in installments of $6.69 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 3 - Jul 8
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
bd tent 1P Swiftline Ultralight TentQuick specs Available in three lengths and with two material options. Rain fly: 368g 13. 0 oz Inner: 239 349g 8. 4 12. 3 oz Packaged wt: 700 811g 24. 7 28. 6 oz Interior height: ~107 109cm ~42 43" Floor width: 76cm 30" Floor length: 203 233cm 80 92" Made in Montana, USA with imported fabric. Description We love the feeling of being inside your tent while the rain falls. Everything feels as it should. This shelter is built for that. The Swiftline is a
Quick specs
Available in three lengths and with two material options.
-
Rain fly:
368g | 13.0 oz -
Inner:
239 - 349g | 8.4 - 12.3 oz -
Packaged wt:
700 - 811g | 24.7 - 28.6 oz
-
Interior height:
~107 - 109cm | ~42 - 43" -
Floor width:
76cm | 30" -
Floor length:
203 - 233cm | 80 - 92"
Made in Montana, USA with imported fabric.
Description
We love the feeling of being inside your tent while the rain falls. Everything feels as it should. This shelter is built for that.
The Swiftline is a lightweight trekking pole shelter designed for livability. An offset pole structure, side vestibule, and double-wall design make for a comfortable, stormworthy shelter.
The original Swiftline
Thirteen years in the making
Conceptualized around 2010 and launched in 2013, the Swiftline gained a loyal following. But there were two things we always knew we wanted to address: the fully asymmetric design made for a steep learning curve when pitching it, and the complex construction made it challenging to maintain consistent quality.
We paused in 2020 to fix both. It's built today in small batches in Missoula, Montana, by us, a team of two. We're glad it's back.
Open layout
On clear nights, roll back the tent walls for a more open and connected experience. Gaze at the stars while remaining protected from the bugs.
Interior space
The Swiftline was a pioneer of the offset pole structure. The diagonal ridgeline puts headroom where you sit, plus volume above your head and at your feet when lying down.
The inner net provides about 43" of interior height along the ridge. At the head and foot, you'll find ~10" of vertical space above the floor. Check out the topo maps below to see the full profile.
Click to enlargeQuick, intuitive pitch - fly first, pole handles up
Stake the four corners, insert and stake the poles, then stake the vestibules. Use eight stakes for maximum stability in storms, or six to save weight.
Pitching the fly first keeps the inner dry in the rain. For faster setup, you can leave both pieces clipped together and pitch them as one.
Orient your trekking poles so the tips point down. This protects the fly from punctures and keeps your pole handles out of reach of nibbling critters.
Designed for trekking poles, with optional tent poles available if you prefer.
Convenience: Side-entry & vestibule space
Enter and exit easily from the side with a zipper that can be operated with one hand. The side vestibule keeps your gear accessible without blocking the door.
Double-wall design
The Swiftline consists of two modular components: a rain fly and an inner net tent. Use the fly solo for a minimalist tarp setup, or pair them together for full protection. The double-wall design creates an air gap between layers that, along with vented apexes, mitigates condensation buildup.
Material options
Silpoly fabric and aggressive curves create a taut, wind-shedding pitch that won't sag in the rain. The fly uses recycled fabric, and the inner comes in two options: a lighter recycled Sil/Sil coated floor with 0.5 oz netting, or a more durable Sil/PU coated floor with 0.6 oz netting for better puncture resistance and grip.
We use a durable #5 Aquaguard zipper on the fly and a lighter #3 on the inner. Zipper sliders are often the first component to wear out, so regular cleaning and lubrication helps extend their life - especially in dusty conditions. If you ever need the sliders replaced, just get in touch.
Tub-floor w/ 3 length options
The Swiftline's floor measures 30" wide and is available in three lengths, 80", 86", or 92" (203, 218, or 234cm). The 7 - 8" deep tub tapers outward at the top to give you more elbow room.
Notes/FAQ:
- Do I need a groundsheet? Using a groundsheet will help extend the life of any floor. It's usually not necessary with either of our floor options, but the light floor option will benefit from a groundsheet more than the standard option.
- Do I need to seal the seams? Yes, before your first trip. Apply Seam Grip +SIL to the outside of the fly seams. Plan for 30-60 minutes. See our seam sealing guide for step-by-step instructions. The floor corners can also be sealed the same way, though it's rarely necessary. If you'd rather skip it, our optional seam sealing service handles it before we ship.
- Can I use the inner with other tarps? The Swiftline inner is unlikely to work well with other tarps, so we don't recommend it.
- Do your Bug Shelters or Bivys work with the rain fly? We do not recommend it. While you might be able to set them up in a pinch, they would be misshapen and difficult to use.
Specifications
Size Recommendations
Material Options
Packaged Weight
Reduce trail weight up to 48g (1.7 oz) by removing some non-essential items
Dimensions
Floor width: 76cm / 30"
Interior Ridge Height*: 109cm / 43"
Tub height*: 20cm / 8"
*Short inner is 1" lower in interior ridge height (42" vs. 43") and tub depth (7" vs. 8").
The dimensioned drawings below show the LONG inner. Subtract 6" in floor length for the Medium, and 12" for the Short. For the Short, also subtract 1" in height.
Click to enlargeRequired items (not included):
- Seam Sealer: Seal the fly's seams before your first trip. Use a sealer made for silicone-coated fabrics: we recommend Gear Aid Seam Grip +Sil. Or use our optional seam sealing service, and we'll handle it before shipping.
-
Trekking Poles: About 120cm (~47") for full height of the shelter.
Or use our optional tent poles. - Stakes: 6 (8 for better wind stability)
Pitching
How to pitch
- Prep: Set your poles to about 120 - 122 cm (47 - 48").
- Stake corners: Stake out the four main corners in a rectangle.
- Insert and stake poles: Pass poles under the fly, grab through the vent and nest the handle in the pole cup. Then stake out the apexes.
- Stake vestibule: Stake out the remaining two corners.
- Adjust: Adjust guylines and stakes to acheive a taut and balanced pitch.
- Attach inner: Clip the inner to the fly at the apexes and corners. Shorten connecting cords to tighten.
Tip: When breaking camp, leave the inner and outer connected so your shelter is ready for a quick, seamless setup next time.
How to pitch just the inner
When the weather is nice, you might want to pitch the inner without the rain fly. Here's how to do that.
- Prep: Unclip the rainfly's apex guylines (2) from the fly. You'll use these for the inner.
- Stake corners: At each corner of the tub, extend the shock cord to nearly its full length and clip it to the tie out at the bottom corner of the tub. Stake out all the corners, fairly tightly, in a rectangle.
- Install pole cups: Clip the guylines to the pole cups, then clip the inner's apex to the opposite side of the pole cup.
- Raise and stake apexes: Insert the pole handle into the pole cup to raise the apexes. Stake them out so the guyline runs roughly inline with the ridgeline.
Tip: If you're having issues with stability, it's likely due to either insufficient tension on the floor, or to the angle at which the guylines are running with respect to the inner.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 1433 reviews
Sort
Product Reviews
★★★★★ 5
Good Replacement Set
Style: 19 Pack
Good replacement set for the price. Parts are basically like the originals and are easily installed for a perfect fit for the 25C.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 11, 2025
★★★★★ 5
Rejuvenates your Robovac, but one caution
I was a little wary buying third-party aftermarket parts for my Eufy Robovac 30c, however, all the parts in this kit are virtually identical to OEM parts. I replaced all three brushes and all three filters and let it loose on my Golden Retriever-inhabited living room. I can honestly say the result was a 50% increase in the amount of fur collected. I suspect that over time there is a loss of performance so gradual that it's easy to not notice. I assume the new filters returned the vacuum power to it's original level of suction was a big factor.
When I was browsing through all the available choices here on Amazon, a plastic "ring" kept appearing in many of the product images, however, people did not know what it is for or simply did not get one in their shipment. If you look at the photos I've attached one can see that I did indeed get one and figured out its purpose, to remove fur and/or hair from the horizontal brush.
The bottom line is that I would definitely buy this item again.
===========
EDIT, four weeks later: Since replacing the main roller brush with the one included with this product, I have experienced several “Roller brush is stuck” shutdowns and alerts. In each case, there has been nothing tangled in the brush and the brush was free to spin. I have to say it’s quite annoying to come home expecting the floor to be cleaned but only to find this error long before the job was finished. Today it gave this error twice in one cleaning cycle. I never experienced this problem with the OEM roller brush.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 8, 2019
★★★★★ 5
Euphy works good as new!
Style: 19 Pack
As soon as I opened the package everything looked the same- pre-filters, filters, main brush, and side brushes. I changed the big brush first;the only issue was the new brush body didn't have the white arrows to help aligning but that didn't affect how the brush worked. I changed filter and pre-filter, and finally the side brushes.
When I turned on my "Goophy" and tried to let her run the side brushes were a little too (Goophy's side brushes sounded a little louder). I trimmed the side brushes a little and all was well. Goophy didn't want to run herself but it didn't take long for me to figure out it wasn't the new brushes ;just the operator pushing the wrong button. My Goophy Euphy did what she was supposed to do- vacuum the carpet and tile floor. Goophy Euphy still wanted to take the long way to her charging station which was nothing new and easily corrected.
Over all the new brushes and filter restored Goophy Euphy back to when we first used her!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 22, 2023
★★★★★ 4
Don't be cheap like me - buy these and save yourself the hassle!
Style: 19 Pack
I made the mistake of going with another, slightly cheaper set of replacement parts for our Eufy RoboVac 11S. I did not heed the cautionary tales which lead me having to find replacement parts for the replacement parts. This brand fits our vacuum perfectly - the corner brushes don't pop off, the filter is the right size and the roller brush gets sufficiently tangled with cat hair so clearly also a good fit. My only concern (and why I only gave four stars) is - surprise! - the corner brushes. Do they stay on? YES! In fact, they is so secure, I had difficulty swapping one out. Here's the peculiarity of the brand - the "whiskers" on the spinner fell out. I found them all over the floor, on different surface types and under various conditions; they were not getting caught on any one thing. Not all at once, but over two or three uses, one of the corner brushes had become devoid of almost two entire spokes! Ironically, the little guy can't seem to pick up his own mess but I digress. Without the whiskers to grasp, removing the part was difficult. I ended up using a small flathead screwdriver for leverage to pop it off. While the other corner brush appeared to have shed some whiskers as well, it was not in need of replacement. Despite the shedding, this will be my first go-to for replacement parts next go round.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 24, 2022
★★★★★ 5
Nothing.
Style: 19 Pack
It’s as shown & working properly for now.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 1, 2026